Daewoo International DTC-410 Manuel D'instructions page 22

Press MENU key, by UP/CID or DOWN/OUT button to select Tone or Pulse according to you local telecom
company. Press MENU key to confirm.
SETTING ALARM CLOCK
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Set alarm.
1. Press MENU key, by UP/CID or DOWN/OUT button to select Set alarm, press MENU again, LCD displays
Alarm off
2. Press UP/CID or DOWN/OUT to select Alarm on. Press MENU key to enter.
3. LCD displays 00-00 Alarm clock and the first 00 flash.
4. Navigate with UP/CID or DOWN/OUT button to modify hour, then press MENU key to confirm,
5. By the same way to set the minute, then LCD will display the alarm icon.
6. When it arrives the setting time, the phone will send out "DI, DI" sound for 30 seconds, press any key to
stop it.
7. NOTE: If you don't need the alarm function, please set it to Alarm off.
SETTING PABX CODE
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Set PABX code.
Press MENU key, there will be "- -" on the screen, navigate UP/CID or DOWN/OUT button to set the exchange
code, press MENU key to confirm.
After you set the PABX code, it will add the PABX code before backing the incoming call which is more than
6-digits.
DISPLAYING SOFTWARE VERSION
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows SW version. Press MENU key to confirm, the LCD will display current version.
LOAD DEFAULT
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Load default. Press MENU key and it will ask Clr all memory? press MENU key again to
confirm, all the setting and memory will be cleared and restored.
ADVANCE FUNCTIONS
PAUSE FUNCTION
When dialing a number, press REDIAL/P key to insert a 3.6s pause between two digit numbers. The pause can
be stored while redialing.
FLASH FUNCTION
While making a call and the line is engaged, press R key and then press REDIAL/P key to dial it out again.
R CALL TRANSFER FUNCTION
To transfer a call during a conversation to another phone number, press R key and dial the desired destination
number. When you here tone signal return the handset to the base to finish the call transfer.
HANDS-FREE VOLUME ADJUSTMENT
Slide the VOLUME (HI/MID/LOW) switch at the side of the base to adjust hands-free volume high, middle or
DTC-410
22