Operation Elements And Connectors - Kewtech KT810 Manuel

Operation Elements And Connectors

➊
➋
➌
➍
➎
➏
➐
1. Measuring terminals N, PE
2. Measuring terminals L1, L2, L3
3. Phase indicators LED for L1, L2, L3 terminals
4. PE and CP Signal output terminals
5. PE Pre-Test warning light indicator
6. PE Pre-Test touch probe
7. "E" - CP Error simulation button
8. PP (Proximity Pilot) State rotary switch selector
(open, 13A, 20A, 32A and 63A)
9. CP (Control Pilot) State rotary switch selector (A, B, C, D)
10. PE Error (Earth Fault) simultion button
11. Mains socket. Use for test purpose only.
Allowed current max. 10 A
12. Mains socket fuse compartment.
Adapter is equipped with 25 Cm cable with type 2 EVSE connector.
2
KT810
➊ ➋
➑
➒
➓
➊ ➊