Télécharger Imprimer la page

YTORA TPW389 Mode D'emploi page 32

Publicité

Les langues disponibles

Les langues disponibles

SETTING THE TEMPERATURE ALARM
Press the "CHANNEL" button to select the desired sensor channel (CH1, CH2, CH3).
Press and hold down the "-" button for three seconds until, in the selected outdoor
temperature display, "OF" is shown and flashes. ,Press "+" or "–" to turn ON or OFF the
temperature alarm. Press "MODE" to set the temperature. From -50°C to +70°C use "+ " or
"-" for setting the wanted limit and press "MODE" to exit the setting.
INFORMATION:
You can set up a temperature alarm for every channel.
If you set the maximum to a temperature, which is lower than the minimum, then you will not
be able to complete the setting process.
The minimum must always be at least 1° C off the maximum value (-50° and +70°).
When the temperature alarm sounds, the appropriate channel and the upper or lower limit
symbol is shown.
RADIO FREQUENCY CONNECTION TO OUTDOOR SENSOR
Press the "CHANNEL" button to select a channel (1, 2, 3 or "scan"). This gives you the option
of reading three outdoor sensors with one weather station.
Press and hold down the "CHANNEL" button for three seconds to search for outdoor
sensors. You can break off this operation by briefly pressing the "CHANNEL" button.
9

Publicité

loading

Produits Connexes pour YTORA TPW389