YTORA TPW389 Mode D'emploi page 26

BUTTONS
ANZEIGEELEMENTE
A "MODE" button
•
Manual time settings (press and hold the button for 3 seconds)
•
To select the wake-up alarms (A1 or A2). Press and hold for 3 seconds to enter the setting
•
Interrupt the alarm
B "+" button
•
In the settings: increase value
•
Press short: display the min/max memory for temperature/humidity
•
Press and hold for 3 seconds: reset the min/max records
•
Interrupt the alarm
C "-" button
•
In the settings: decrease value
•
Press short in the wake-up alarm display: Alarm on/off
•
Press short in the time display: select °C or °F
•
Press and hold for 3 seconds: enter the temperature alarm setting
•
Interrupt the alarm
D "HISTORY" button
•
Barometer-Settings (press and hold button for 3 seconds): local altitude, weather icon,
pressure unit (hPa or inHg)
•
Interrupt the alarm
E "CHANNEL" button
•
Press and hold for 3 seconds: Start sensor search
•
Press short: Select the sensor to be displayed
•
Interrupt the alarm
F "SNOOZE / LIGHT" button
•
Activates backlight for about 5 seconds
•
Activates snooze cycle (5 minutes) when the alarm sounds
3