KLASS Fan TRAMONTANA Manuel D'utilisation page 19

5
Slide the remote controller receiver
unit into the slot on the mounting
bracket.
6
Wire-in the remote controller receiverunit as shown in the figure below. Terminal
block on the mounting bracket must be used between the receiver output wire
and the motor wires. Terminal block provided separately along with the remote
controller pack must be use to connect between the supply wire.
To fan
Canopy
Pink (brown)
To motor Grey
wire Red
Remote receiver
Brown
Blue
Yellow/Green
Black wire
Antenna wire
17
Power supply
Power supply live-wire
Power supply neutral-wire
Ground wire