gartenpirat GP1350 Instructions page 6

Step 6: Slide the Swing Case (N) through the Upper
Pipes (H)
Step 7: Assemble the other Handle Tube (K) & Stepper (L)
7-1.
Bolt the Stepper (L) onto the Handle Tube (K) by using bolt (A) x 2 + spring washer (D) x 2
and domenut (E) x 2.
7-2.
Fasten the second Handle Tube (K) to the Lower Pipes (G) by using bolt (A) x 2
+ spring washer (D) x 2 and domenut (E) x 2. Bolt the Upper Pipes (H) by using bolt (B) x 2 +
washer (C) x 2 + spring washer (D) x 2 and domenut (E) x 2.
Step 7-1.
Page 6 of 7