Jole stages ISOFIX Manuel De L'utilisateur page 9

If the stages™ isofix is secure, the
stages™ isofix latched indicator
shows green. If the stages™ isofix is
not secure, the stages™ isofix shows
red. -1
15
1. Infant insert is for children's
protection. Child 0-6 months must
use the full insert.
2. Infant insert includes head support
and body portion and wedge.
3. Please install the base on
the vehicle seat, then install
the shell, and then put the child in
the stages™ isofix.
4. After the child is placed into the
seat, check whether the shoulder
harnesses are at correct from
proper height.
5. Please make sure the infant insert
has the wedge assembled before
using it for infant. 16
6. Detach the snaps on the head
support, and then remove the infant
insert. Please refer to (Use Infant
Insert). To assemble head support
in reverse steps.
17
7. After removing the wedge from
the infant insert, please store it in
a place where the child can not
access it.
13
15
1
16
17
Securing your Child in the stages™ isofix
Rearward Facing
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper
length.
18
-1 Adjustment webbing
18
2. Press the red button to disengage
the buckle.
19
3. Fix the buckles on the both sides
of seat to make placing the baby
more convenient. 20
18
1
19
20
14