Romus 93472 Mode D'emploi page 11

Step
6: Push the heater head onto the top hollow tube and fix it in position using the supplied 2 X
M4*8 screws.
Complete !
Connect the power cable to a 13 amp supply that is located in a safe, dry area.
- The switch on the heater head is used to control the one heat setting. The 0 position is off.
- Although the patio heater is shower proof, do not use when raining or in wet conditions.
- Always disconnect the power cable from the electrical supply, when the patio heater is not in use.
Voltage Rating
Power Consumption
Unit Size
Unit Weight
Class
Protection
Operation
Technical specification
220-240V, 50 Hz
1200 W
58.5 cm x 46 cm x 200 cm
13.8 kg
Class I
IP44
Electric Patio Heater| Ref. 93472
4