Télécharger Imprimer la page

Fontanot oak.xtra Mode D'emploi page 25

Masquer les pouces Voir aussi pour oak.xtra:

Publicité

IT)
dati identifi cativi del prodotto
denominazione commerciale: OAK.XTRA
tipologia: balaustra
materiali impiegati
descrizione
composta da colonnine (3) in metallo, corrimano (1) in
PVC, tubi (5) in PVC
materiali
colonnine (3): Fe 520
corrimano (1): PVC con anima in alluminio
fi ssaggi (2): nylon
fi ssaggi (4): alluminio
tubi (5): PVC
fi nitura
colonnine (3) e fi ssaggi (4): verniciatura a forno con
polveri epossidiche
PULIZIA E MANUTENZIONE OBBLIGATORIA
Eseguire la pulizia della scala alla prima comparsa
di macchie di sporco e depositi di polvere e
periodicamente almeno ogni 6 mesi con panno morbido
inumidito in acqua e detergenti specifi ci non abrasivi ed
aggressivi. NON usare mai pagliette abrasive o in ferro.
Pulire ed asciugare accuratamente dopo il lavaggio
con un panno in microfi bra al fi ne di eliminare gli aloni
del calcare presente nell'acqua. Dopo circa 12 mesi
dalla data di installazione, controllare il serraggio della
viteria dei vari componenti. Al verifi carsi di qualsiasi
minimo malfunzionamento è obbligatorio effettuare
una manutenzione straordinaria, da eseguire subito e
a regola d'arte.
PRECAUZIONI D'USO
Evitare usi impropri e non consoni al prodotto, eventuali
manomissioni o installazioni non rispondenti alle
istruzioni del produttore possono infi ciare le conformità
prestabilite del prodotto.
EN)
product details
trade name: OAK.XTRA
type: balustrade
used materials
description
composed of metal balusters (3), PVC handrail (1) and
PVC tubes (5)
materials
balusters (3): Fe 520
handrail (1): PVC with aluminium core
fi xings (2): nylon
fi xings (4): aluminium
tubes (5): PVC
fi nishing
balusters (3) and fi xings (4): oven varnishing with epoxy
powders
OBLIGATORY CLEANING AND MAINTENANCE
Clean the treads as soon as dirt spots and dust
deposits appear and at least every 6 months using a
soft cloth moistened with water and specifi c nonabrasive
and non-aggressive detergents. NEVER use abrasive
scourers. After cleaning, thoroughly dry the surfaces
with a microfi bre cloth to remove the haloes that form
because of the limestone in the water. Approximately 12
months from the date of installation, check tightness
of the screws of the various components. Should
even the smallest malfunction occur, it is obligatory to
immediately and professionally carry out extraordinary
maintenance.
USE PRECAUTION
Avoid any improper use that is not in accordance with the
product. Possible violations or installations which don't
comply with the providers instructions can invalidate the
agreed product conformities.
-
-
25
oak
Oak.Xtra

Publicité

loading