Bimar Z28 Mode D'emploi page 10

 Always unplug the appliance from the plug point before
cleaning the appliance.
 If the appliance is not being used, unplug it from the socket.
 Do not pull the power cord or the appliance itself to unplug it
from the wall socket.
 Do not use the appliance near a bathtub, a shower, swimming
pool or basin/sink, etc., nor in areas where it can be bumped.
 If the power cord, the lamp or other parts of the appliance are
damaged, they must be replaced by the manufacturer or its
technical assistance centre or by someone who is similarly
qualified in order to avoid any risks.
 The appliance must not be used in places where there are
flammable or explosive dusts.
 This device is not intended to be operated by means of an
external timer or a separate remote control system in order to
avoid the risk of fire where the device is covered or is not
positioned correctly.
 The lamp of the insect killer cannot be replaced, the appliance
should be disposed when the lamp not function.
Caution: do not cover the device when it is on, to avoid fire
hazards.
INSTALLATION
 After unpacking, check that all parts have been included; if in doubt, do not use
and contact a qualified technician. The packaging materials (plastic bags,
polystyrene, nails, etc.) must not be left within reach of children, as they
constitute possible sources of danger and must be disposed of according to
applicable regulations in the appropriate recycling containers.
 Before plugging in the device, ensure that the details on the identification plate
(power, etc...) correspond to those of your power supply. The use of adaptors,
multiple plug points or extensions is generally not advisable; if it is necessary to
use them, they must conform with safety regulations and the total current
(amps) must not be rated lower than the maximum current of the the appliance.
10