Accessories And Replacement Parts - Beurer Maremed MK 500 Mode D'emploi

If it is not cleaned adequately, bacteria, algae and fungi may form in the water and
on the water filter.
Rinsing the tank
Always rinse the tank with clean water before filling it up again. If the air is heavily pollut-
ed, the device is used intensively or the water quality is poor, the maremed
cleaned at more frequent intervals. If necessary, remove any deposits in the tank using a
cleaning cloth.
Alternatively: The tank is dishwasher-safe. Set the dishwasher to a gentle cycle (for
cleaning glass) and if possible remove the part before the drying process. The cycle must
not exceed a temperature of 50 °C otherwise the plastic parts may deform.
Cleaning the fan unit
You can wipe the fan unit with a damp cloth. However, make sure that no liquid enters the
fan unit under any circumstances.
Cleaning the cover
You can wipe the cover with a damp cloth.
Storage
If you do not plan to use the device for a relatively long period of time, we recommend that
you thoroughly empty, clean and dry the device and store it in the original packaging in a
dry environment, ensuring it is not weighed down by additional items.

9. Accessories and replacement parts

For accessories and replacement parts, please visit www.beurer.com or contact the corre-
sponding service address in your country (according to the service address list). Accesso-
ries and replacement parts are also available from retailers.
Designation
Complete set
- 1x bottle of maremed
- 4x pre-filters
- 2x water filters
Filter set
- 2x pre-filters
- 1x water filter
maremed ® special sea salt
- 1x bottle of maremed
UVC lamp
- 1x UVC lamp
® special sea salt (1250 g)
®
special sea salt (1250 g)
Item number and/or order
number
681.21
681.22
681.23
681.24
36
® should be