Table des Matières
Publicité
DCI reserves the right to make changes in design and improvements upon DCI Products from time to time, and
User understands that DCI shall have no obligation to upgrade any previously manufactured DCI Product to
include any such changes.
THE FOREGOING LIMITED WARRANTY IS DCI'S SOLE WARRANTY AND IS MADE IN PLACE OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY
IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE
OF TRADE, ALL OF WHICH ARE HEREBY DISCLAIMED AND EXCLUDED. If DCI has substantially
complied with the warranty claim procedures described below, such procedures shall constitute User's sole and
exclusive remedy for breach of the Limited Warranty.
LIMITATION OF REMEDIES AND LIABILITY
In no event shall DCI nor anyone else involved in the creation, production, or delivery of the DCI
Product be liable for any damages arising out of the use or inability to use the DCI Product, including
but not limited to indirect, special, incidental, or consequential damages or for any cover, loss of
information, profit, revenue or use based upon any claim by User for breach of warranty, breach of
contract, negligence, strict liability, or any other legal theory, even if DCI has been advised of the
possibility of such damages. In no event shall DCI's liability exceed the amount User has paid for the
DCI Product. To the extent that any applicable law does not allow the exclusion or limitation of
incidental, consequential or similar damages, the foregoing limitations regarding such damages shall
.
not apply
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. This Limited Warranty shall be governed by the laws of the State of Washington.
WARRANTY CLAIM PROCEDURES
1. If you are having problems with your DCI Product, you must first contact the Authorized DCI Dealer where it
was purchased. If you are unable to resolve the problem through your Authorized DCI Dealer, contact DCI's
Customer Service Department in Kent, Washington, USA at the above telephone number between 6:00 a.m.
and 6:00 p.m. Pacific Time and ask to speak with a customer service representative. (The above "800" number
is available for use only in the USA and Canada.) Prior to returning any DCI Product to DCI for service, you
m ust
obtain a Return Merchandise Authorization (RMA) number. Failure to obtain a RMA may result in delays
U
U
or return to you of the DCI Product without repair.
2. After contacting a DCI customer service representative by telephone, the representative will attempt to assist
you in troubleshooting while you are using the DCI Product during actual field operations. Please have all
related equipment available together with a list of all DCI Product serial numbers. It is important that field
troubleshooting be conducted because many problems do not result from a defective DCI Product, but instead
are due to either operational errors or adverse conditions occurring in the User's drilling environment.
3. If a DCI Product problem is confirmed as a result of field troubleshooting discussions with a DCI customer
service representative, the representative will issue a RMA number authorizing the return of the DCI Product
and will provide shipping directions. You will be responsible for all shipping costs, including any insurance. If,
after receiving the DCI Product and performing diagnostic testing, DCI determines the problem is covered by
the Limited Warranty, required repairs and/or adjustments will be made, and a properly functioning DCI Product
will be promptly shipped to you. If the problem is not covered by the Limited Warranty, you will be informed of
the reason and be provided an estimate of repair costs. If you authorize DCI to service or repair the DCI
Product, the work will be promptly performed and the DCI Product will be shipped to you. You will be billed for
any costs for testing, repairs and adjustments not covered by the Limited Warranty and for shipping costs. In
most cases, repairs are accomplished within 1 to 2 weeks.
4. DCI has a limited supply of loaner equipment available. If loaner equipment is required by you and is
available, DCI will attempt to ship loaner equipment to you by overnight delivery for your use while your
equipment is being serviced by DCI. DCI will make reasonable efforts to minimize your downtime on warranty
claims, limited by circumstances not within DCI's control. If DCI provides you loaner equipment, your equipment
must be received by DCI no later than the second business day after your receipt of loaner equipment. You
must return the loaner equipment by overnight delivery for receipt by DCI no later than the second business day
after your receipt of the repaired DCI Product. Any failure to meet these deadlines will result in a rental charge
for use of the loaner equipment for each extra day the return of the loaner equipment to DCI is delayed.
Page 2 de 2
3-3200-01-C (French)
Publicité
Table des Matières
