Publicité
Les langues disponibles
Les langues disponibles
Initial commissioning and operation
Avoid damage to the glass cover and display!
The touch-sensitive surface can easily be damaged! Use only your fingers or a
▪
touchpen to operate the panel. Do not use sharp or pointed objects.
Do not use harsh detergents, scouring agent, acids, or organic solvents. Do not use
▪
any sharp objects for cleaning.
Do not let any moisture get into the unit. Do not spray cleaning agents directly onto
▪
the surface of the touchscreen.
Touch the panel to operate. A brief touch of the panel is interpreted as a mouse click. A right
mouse click is obtained by a prolonged touch (approx. 3 seconds).
Text entries can be made using the Windows on-screen keyboard. This can be found in the task
bar at the bottom right.
Activate keyboard input
To automatically display the keyboard when tapping on a text input field, do the following:
Swipe into the screen from the right and select "All settings".
▪
Select "Devices" > "Typing".
▪
Under "Touch keyboard", check the last item: "Show the touch keyboard when not in tablet
▪
mode and there's no keyboard attached."
To display the keyboard icon in the taskbar:
right-click on the taskbar and select "Show touch keyboard button".
▪
Switching the Controlmicro on and off
Note:
In the delivery state, the panel automatically logs on with the username Controlmicro
without a password. After the Login, additional users can be added at any time or further
settings may be changed in the Windows Settings.
Switching On
The panel turns itself on after the fuse is turned on.
Note:
In normal operating conditions it is not necessary to switch off the Controlmicro.
If you need to restart the panel after shutdown, there are 2 ways:
a)
Disconnect the circuit breaker of the panel.
−
This procedure is suitable if the anti-theft screws have been used.
b)
Disconnect the panel from the mounting plate so that the power supply is cut off.
18
Caution
Publicité
