Publicité
Les langues disponibles
Les langues disponibles
Nozzles
Small brush nozzle: for the vacuuming of narrow surfaces and corners.
Hose with crevice nozzle: perfect for vacuuming the interior of cars.
These nozzles are perfect for furniture, upholstery, frames and plenty more.
ere.
Cleaning
AVVISO:
•
Always remove the mains lead before cleaning!
•
Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an
electric shock or fi re.
CAUTION:
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
1. To clean the fi lter, press the button (2) to open the device.
2. Remove the fi lter and knock it. The fi lter can be cleaned under running water. Make sure that the fi lter is perfectly dry.
3. Mount the dust container again and close the vacuum as described in „Putting the Appliance into Operation".
4. Clean the casing with a dry cloth.
After use
Always pull the plug out once you have fi nished using the vacuum. The vacuum can be stored vertically without wasting any space.
Noise development
The sound pressure level in the ear of an operator (LpA) was measured according to DIN EN ISO 3744.
Sound pressure level detected: 90.0 dB(A) (no limit)
Technical Data
Model: ..................................................................................................................................................................................................... MS-80
Power supply: ............................................................................................................................................................................................ 12 V
Pmax.: ..................................................................................................................................................................................................... 100 W
Protection class: ............................................................................................................................................................................................. ΙΙ
•
This device has been tested according to all relevant current CE guidelines, such as electro- magnetic compatibility and low voltage
directives, and has been constructed in accordance with the latest safety regulations.
•
Subject to technical changes without prior notice!
Meaning of the "Dustbin" Symbol
•
Protect our environment: do not dispose of electrical equipment in the domestic waste.
•
Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
•
This helps avoid the potential effects of incorrect disposal on the environment and human health.
•
This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.
•
Information concerning where the equipment can be disposed of can be obtained from your local authority.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this
product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize
its impact on the environment. For further information, please contact your local or regional authorities. Electronic
products not included in the selective sorting process are potentially dangerous for the environment and human heath
due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MS-80, applies all basic requirements and other relevant regulations listed in
the European directive for electromagnetic compatibility (2004/108/EC) and low voltage directive (2014/35/EU). If you require a full
declaration of conformity, you can contact the adress listed on the backside of this manual
ENGLISH
Publicité
