Zeegma Handy Chef Manuel De L'utilisateur page 7

3. Place ingredients in the tank of Mini Chopper.
4. Lock Mini Chopper with a lid by turning the cover in a clockwise direction.
5. Mount the body of the device in the lid until you can hear a click.
6. Make sure the maximum level has not been exceeded.
7. Press the key and simultaneously set the desired speed. Release the
key to make the device stop working.
8. To reduce injury risk, never place cutting blades in the body of the
device before you place them properly inside the tank of Mini Chopper.
9. Make sure the lid has been properly assembled before you use the device.
Mixing tip
1. Mount the mixing tip on the body of the device (fig. 3). If the assembly is
correct, you will hear a distinctive click. Put the plug into the power socket.
2. Do not beat more than 6 eggs at a time.
3. Press the key and simultaneously set the desired speed.
4. Release the key to make the device stop working.
Cleaning and maintenance
1. Switch the device off, unplug it and detach accessories.
2. You can clean the body of the device with a wet cloth and mild cleaning
agents. Do not immerse the body of the device in water or other liquids.
3. The blending tip and accessories may be cleaned under running water
with the use of mild cleaning agents.
4. Note: be careful when handling the blade.
5. Make sure the device and accessories are completely dry before
another use.
The pictures are for reference only. The real design of the products may
differ from the pictures presented.
EN