Télécharger Imprimer la page

ARENDO 303865 Mode D'emploi page 35

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Error
The ice-making
process seems to
run as usual, but
no ice is produced
The water pump
does not work or
makes noises.
CAUTION!
9. Safety instructions and disclaimer
Please do not try to open the appliance to carry out repairs or modifications by
yourself. Avoid contact with the mains supply. The appliance does not carry current
only when disconnected. Please do not short-circuit the product. Do not forget to
disconnect the power cord when the appliance is not being used or during thun-
derstorms. The appliance is not approved for outdoor use. Please use it only in dry
surroundings. Protect it from high humidity, water and snow. Never expose the
appliance to high outside temperatures. Do not expose the appliance to sudden
English
Cause
• Water temperature is
too high
• Ambient temperature
is too high
• Cooling system is not
working
• The water pump is
damaged.
• The unit has not
been cleaned for a
long time, resulting
in the formation of
a slimy substance
at the water inlet of
the water pump, so
that the water de-
livery does not work
smoothly. There is
air in the water pipe,
so resonance noise
occurs when water is
pumped.
Troubleshooting
• Fill the water tank with water
at a temperature of between
8°C and 25°C
• Make sure that you operate
the appliance only in an am-
bient temperature between
10°C and 32°C
• Please contact our Customer
service department
• Contact the service centre.
• The appliance should be
cleaned in one to two
weeks, adding some neutral
detergents (e.g. washing-up
liquid and soapy water, etc.)
if necessary.
35

Publicité

loading