eTIGER ES-DL02 Installation page 9

Simplified Instruction
Function description:
Enter the Program Mode:
Change the Master Code:
IMPORTANT NOTE: Please remember
the New Master Code as it can't be reset
to default if forgotten
Add PIN User:
Add Card User:
Add fingerprint User:
Delete User:
Exit from the Program Mode:
How to release the door
PIN Access:
Card Access:
By Remote Transmitter:
By Wireless Lock:
Fingerprint Access:
Lock Immediately
By Keypad:
By Remote Transmitter:
By Wireless Lock
PROGRAMMING
Enter and Exit Program Mode
Programming Step
1. Enter Program Mode:
2. Exit:
Set Master Code
Please do remember your Master Code because the Master Code can't be reset if forget it.
Programming Step
1. Enter Program Mode:
2. Update Master Code:
3. Exit:
Operation
*(123456)#
(123456 is the factory default master code)
0 (New Code) # (Repeat New Code) #
(code: 6 digits)
1 (User ID) # (PIN) #(Repeat PIN) #
1 (Read Card)
1 (User ID) #（Read fingerprint）
2 (User ID) #
2 (Read Card)
*
PIN #
(Read Card)
Press
Touch
OPEN
(Read Fingerprint)
Press "0#"
Press
Touch
Keystroke Combination
* (Master Code) #
(Factory default is 123456)
*
Keystroke Combination
* (Master Code) #
0（New Master Code）#
（Repeat New Master Code）#
Master code is any 6 digits
*