Modifying Display Options - DAITEM SC900AX Notice D'utilisation

GB
11.4 Modifying the display options
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
Menu
possible
NAME ACCESS 1
KEYPAD 1
KEYPAD 2
Factory:
• ACCESS 1 for
1st access,
ACCESS 2 for
2nd, etc.
• KEYPAD 1 for
1st key,
KEYPAD 2
for 2nd, etc.,
as described in
the table on the
next page
BACK- ON ACTION
LIGHTING NIGHT MODE
ACTIVE
IMPORTANT: if a power cut occurs and the controller has battery back-up, backlighting is activated when a
button is pressed or a badge used.
If the controller is powered by a solar panel, ACTIVE must be selected. Backlighting will be enabled when a
button is pressed or a tag used.
All manuals and user guides at all-guides.com
PARAMETERS
Setting
Can be used to modify a name given to an access
or to a call button (8 characters max.).
1. Select the name to be modified.
2. Modify the 1
using the keys
3. Move on to the next character
using the key
The
4. Perform steps 2 and 3 for all the characters and then, once
the desired name has been programmed, press
IMPORTANT: the KEYPAD 1/KEYPAD 2 menu is only displayed if the
2 outdoor caller unit call buttons have been programmed to be
recognised by the same handset.
Can be used to define the outdoor caller unit backlighting
operating mode.
If the controller is connected to an external power supply or
a solar panel, you can select the following depending on the
type of outdoor caller unit:
MHF03X / MHF04X
MHF05X / MHF06X units
ACTIVE
ON ACTION
TAGS
PIN
DISPLAY
SOUNDS
PULSE
INFOS
Using the setting
character
st
.
.
key selects the previous character.
MHF01X
MHF02X units
ACTIVE
NIGHT MODE
ON ACTION
134
NAME
BACKLIGHTING
.
Backlighting is activated 24 hours/day
Backlighting is activated at night time
Backlighting is activated when a button
is pressed or a tag used
C
C