Product Features - Tempo Communications EML100 Manuel D'instructions

Product Features

The EML100 Marker-Mate
utility frequencies used in buried markers such as the Omni Marker II
Marker products.
Main Features
• Depth range of over 1.5 m (5 ft).
• Detects up to nine different marker types
• SCAN mode provides simultaneous detection of all marker types
• Rapid switching between SCAN and single modes
• User-adjustable detection threshold
• Digital signal processor accuracy
• Large-character display
• Bar graph, numeric, and audible signal strength indicators
• Adjustable speaker volume
• Headphone jack
• Battery level indicator
• Low battery warning
• Adjustable time-out feature
• Weather resistant
• Rugged construction
Electronic Markers
Electronic markers can vary slightly in detection depth, but Tempo Omni Markers are
detectable to at least 1.5 m (5 ft) in normal conditions. The industry standard color code for
different frequency markers is as follows:
Application
Non-Potable Water Purple
Cable TV
Gas
Fiber Optic
Telephone
Sanitary
Europower
Water
Power
Refer to "Compatible Markers" for details about the Omni Marker II electronic markers and
Spike Markers listed as SM-XX.You can find these on TempoCom.com.
Headset
A headset may be used to monitor the received signal in high noise level areas when
plugged into the jack provided. The normal speaker is de-activated when a headset is used.
Any standard stereo headset with a 3.5 mm plug may be used with the EML100.
6
Electronic Marker Locator is designed to llocate nine standard
®
Color Frequency
66.4 kHz
Orange/Black 77.0 kHz
Yellow 83.0 kHz
Yellow Black 92.0 kHz
Orange 101.4 kHz
Green 121.6 kHz
Blue/Red 134.0 kHz
Blue 145.7 kHz
Red 169.8 kHz
and the Spike
TM