Maintenance And Troubleshooting; Inspection And Maintenance Schedule; Description Of Inspection And Maintenance Work; Troubleshooting / Remedying Faults - GIFAS ELECTRIC AlphaLUXX-AC 120 Mode D'emploi

Operating Instructions for AlphaLUXX-AC 120 / 100 / 80

4 Maintenance and troubleshooting

4.1

Inspection and maintenance schedule

Work to be carried out
Function test
Cleaning of cooling fins and front pane
4.2

Description of inspection and maintenance work

All of the functions of these lights should be maintained in accordance with the relevant provisions, standards
and regulations of the country in which they are being used, and in every case checked by professionally
trained personnel.
4.3

Troubleshooting / remedying faults

Fault / error message
LED module does not light up.
LED module is flickering.
Safety glass is faulty.
Hint
The light sourcThe light source for this light must only be replaced by the manufacturer or a service engineer
commissioned by the manufacturer or a trained professional with equivalent qualifications.
Technical modifications and mistakes reserved.
These operating instructions are the property of GIFAS ELECTRIC GmbH and may not be copied, translated,
transmitted, duplicated or shared with third parties without the prior written consent of GIFAS ELECTRIC
GmbH.
Created Edited
27/01/2016 11/04/2017
A.S. A.S.
Timeframe / interval
In accordance with country-specific provisions / as re-
quired
According to level of dirt
Possible cause(s)
Power interruption
Error during installation of the
connecting cable
LED module faulty
Possibly loose connection of
the light
LED module faulty
Object ID
....
Remedy
Contact the manufacturer GIFAS or have
the fault investigated on site by a specialist.
Send the light in for inspection if necessary.
Contact the manufacturer GIFAS or have
the fault investigated on site by a specialist.
Send the light in for inspection if necessary.
Send the product in to GIFAS for repair.
Page 22 / 46