Cleaning And Care - oneConcept Freeze Me Mode D'emploi

EN
20

CLEANING AND CARE

Note: Ensure that the fan is switched off from the supply mains before
removing the air filter screen.
1. Clean the air filter screen
• Cut off the power supply, pull the handle of air filter screen, remove it from
appliance.
• Clean the air filter screen with neutral detergent and banister brush, then
clean it with clear water.
• Finally, reinstall to the appliance.
2. Clean the wetted pad
• Cut off the power supply, take down the air filter screen, then draw the
wetted pad from support.
• Clean the wetted pad with neutral detergent and banister brush, then
clean it with clear water.
• Finally, reinstall to the appliance.
Attention: the wetted pad must be installed horizontally, in order to
avoid leaking.
3. Clean the water tank
• Cut off the power supply, open the door, take out the water tank, clean it
with neutral detergent, and wash it with clear water.
• Then reinstall to the appliance.