Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
16
INSTALLATION
Assembling castors
Put the appliance on a flat surface, take out the wrench from foam box, then
assemble the castors.
Watering:
Pull out the water tank 1/3 and fill it with clean water (see map 1).
a.
Pay attention to the level of water tank when add water.(map 2)
b. The level of water tank should not over "MAX" scale at any time, when
humidifying, the total level of water tank should not below "MIN" scale.
c.
Put ice or frozen ice box to the water tank if you want to strengthen the
efficiency of cooling. But the total level of water tank should not over
"MAX" scale.
Map 1
Note: Alternatively, you can also fill the Air Cooler conveniently from
above. Open the corresponding flap on the top of the unit and fill the water
directly into the water circuit.
Map 2
Publicité
Chapitres
Table des Matières
Dépannage
