Schrack Technik FT PLANUX 02 Mode D'emploi page 6

WARNINGS
Comelit Group S.pA. does not assume responsibility for improper use of the apparatus, for modifications
made by third parties for any reason or purpose, or for the use of non-original accessories and materials.
Caution! In order to reduce the risk of faults and electric shocks:
• Do not open the apparatus or carry out any repairs yourself. If necessary, request the services of qualified
personnel.
• Do not insert objects or pour liquids into the device.
• Clean using a damp cloth. Do not use alcohol or other aggressive products.
Description of the monitor and user information Fig. 1.
1. Audio key.
2. Door lock key.
3. Menu key: Use this key to access and exit the menu, and to go back one level in the menu.
4. Confirm key: Confirms the selection made and provides access to the next menu level.
5. Navigation keys: Use these keys to scroll through the headings and modify the value of the selected heading.
6. Switchboard call / Intercom call key (programmable*).
7. Generic actuator key (programmable*).
8. Self-ignition key (programmable*).
9. Privacy (Doctor*) key.
NOTE If, after a key is pressed, it flashes for 4 seconds, this means the function is not available or the
system is busy.
Using the basic Planux monitor functions (for comprehensive details of how to use all the functions,
see FT/PLANUX/01)
·
The two LEDs flash in response to a call Fig. 2.
To activate the audio line, press
To activate the electronic door lock function, press
·
Press to activate the Switchboard call or Intercom call function. A call is transmitted to the
corresponding switchboard (if present) or an intercom.
·
Press to activate the Generic actuator function. The monitor will beep to confirm activation.
·
Press to activate the Self-ignition function; the image from the corresponding external unit will
appear on the monitor. By pressing
present).
·
Press the key to activate the privacy function. The red LED will light up to indicate that the function
has been activated.
FT PLANUX 02 8
and wait for the LED to illuminate steadily before speaking.
. The monitor will beep to confirm activation.
repeatedly, you can switch between the external units (MAX. 2 if
* See FT/PLANUX/01