Pole Assembly - Rowenta IS5100 Mode D'emploi

ENVIRONMENT L PROTECTION FIRST !
i Your appliance contains valuable materials which can be
recovered or recycled.
‹ When disposing of it, take it to a collection point or an
approved service center.
G RMENT STE MER SSEMBLY

Pole assembly

1. Place the base on the floor and put in the water tank.
2. Insert the telescopic pole into the base and turn the locking ring to
secure it into place.
3. Fit the hook onto the top of the pole until you hear a click sound.
(fig.3)
4. Insert the hanger into the 2 holes located at the back side of the hook
and pull it down to secure it.
5. Place the steam head on the hook.
fig.1
Functioning of the rotary hangers
This garment steamer is equipped with rotary hangers in order to store
the steamer easily. To turn the hangers
1. Gently pull the hanger (a) to free it from the notch located at the back
of the hook (b).
2. Turn the hanger to set it horizontally or to store it vertically.
(fig.6 nd 7)
3. Fit parts (a) and (b) together in the desired position.
The dual clip system is adjustable in height in order to be perfectly
adapted to the different garment lengths.
fig.4b
(fig 2 , 2b)
(fig.4 , 4b)
fig.2a
(fig.5)
b
a
fig.5
fig.2b
fig.6
19
(fig.1)
fig.3 fig.4a
(fig.8)
fig.7 fig.8
b
a