Installation - Wolf MC24 Mode D'emploi

IN S TA L L AT I O N

Installation

The convection microwave oven can be installed in a
standard or flush inset application using accessory trim
to match Wolf E Series or L Series Ovens. Trim kits are
avail able through an authorized Wolf dealer. For local
dealer information, visit the find a showroom section of our
website, wolfappliance.com. Installation instructions are
provided with the trim kit.
The convection microwave oven can also be used free-
standing. For freestanding applications, a minimum 2"
space is required at the top, rear, and sides of the micro-
wave oven for air circulation.
|
6 Wolf Customer Care 800.222.7820
Electrical
Installation must comply with all applicable electrical codes.
Locate the electrical supply within reach of the power cord.
For built-in applications, refer to installation instructions
provided with the trim kit for electrical location.
E L E C T R I C AL R E Q U I R E M E N T S
Electrical Supply
Service
(51)
Receptacle
Power Cord
GR O U N D IN G IN STR U C TI ON S
This appliance must be grounded. The microwave oven
is equipped with a cord having a grounding wire with a
grounding plug. It must be plugged into a wall receptacle
that is properly installed and grounded in accordance with
the National Electrical Code and local codes and ordi-
nances. In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an escape wire
for the electric current.
WARNING
Improper use of the grounding plug can result in a risk
of electric shock. Do not use an extension cord. If the
power cord is too short, have a qualified electrician or
service technician install an outlet near the appliance.
RATING PLATE
Rating plate location
grounded, 120 VAC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
4'
(1.2 m)