Table Des Matières - Viking D3 Guide D'installation

Table of Contents
Warnings & Important Information ------------------------ 2
Specifications --------------------------------- 3
General Information ------------------------------- 4
Parts Included in the Kit ------------------------- 4
Cabinet or Wall Cutout -------------------------- 4
Electrical Outlet Location ------------------------- 4
Installation ----------------------------------- 5
Mounting Template --------------------------- 5
Bottom Duct Assembly -------------------------- 6
Mounting Bracket Assembly ----------------------- 6
Cabinet Installation --------------------------- 7
Frame Assembly ----------------------------- 7
Side Decoration Assembly (For Surface Mount Only) ------------- 8
Over Oven Installation -------------------------- 8
Performance Checklist ----------------------------- 8
IMPORTANT-
• Before beginning, please read these
instructions completely and carefully.
• Be sure to DISCONNECT THE PLUG of the
microwave oven from the electrical outlet
before installing the built-in trim kit. Remove
the turntable from the oven cavity.
• Because the kit includes metal parts, caution
should be used in handling and installation
to avoid the possibility of injury.
• Do not remove permanently affixed labels,
warnings, or plates from the product. This
may void the warranty.
• Please observe all local and national codes
and ordinances.
• The installer should leave these instructions
with the consumer who should retain for local
inspector's use and for future reference.
E
Please Read and Follow!
This built-in trim kit is designed for use only
with Viking microwave ovens specifying built-
in trim kit RDMTK302 on the rating label on
the left side wall of the oven cavity.
2
WARNING