Publicité
Les langues disponibles
Les langues disponibles
• Move the headgear to a different slot on the interface frame.
• Rotate the cushion forward or backward on the attachment hub.
• Re-adjust the mask while lying down.
Tube Management
The long, flexible tubing allows for more mobility and comfort and can
be used in a variety of positions. The tube management clip with fabric
ring allows you to position the tubing to accommodate your needs.
The fabric ring can be placed anywhere along the tube and the clip can
be attached to your clothing (Figure 10) or to the pillow case (optional)
when the tubing is placed under the pillow (Figure 11).
The OptiLife tubing can be placed over your head (Figure 12). The
fabric ring can be reversed so that the sticky side is on the outside and
can attach to the headgear. Or, you can use clip to fasten the tube to
the headgear.
Tube Management Tips
DON'T (Figure 13)
• Crush or crimp the tube.
• Allow the cradle cushion to pull away from your nose.
• Allow the pillows cushion to come out of your notrils.
DO (Figure 14)
• Allow for flexibility and movement of the tubing.
• Use the fabric ring and/or tube management clip to provide
mobility without restraining the mask and headgear.
Philips Respironics System One Resistance Control
Your mask when combined with a Philips Respironics System One
device, provides optimal resistance compensation.This value is
identified below and should be set by your provider.
Pillows Cushion
Size
P
S
M
L
Notes:
• Compare the mask to the device. See your device manual if the
values do not match.
• System One is not compatible with masks that use a separate
exhalation device.
Specifications
Warning: The technical specifications of the mask are provided
for your healthcare professional to determine if it is compatible
with your CPAP or bi-level therapy device. If used outside these specifications, or if used
with incompatible devices, the mask may be uncomfortable, the seal of the mask may not
be effective, optimum therapy may not be achieved, and leak, or variation in the rate of
leak, may affect device function.
Cradle Cushion
Setting
Size
X3
S
X4
M
X2
LN
X1
L
Setting
X1
X1
X1
X1
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
5
Publicité
