Innokin PRISM T18 CLEAROMIZER Manuel D'utilisation page 47

COMMISSIONING OF THE DEVICE
Changing the Atomizer Head
1. Remove the clearomizer from the battery / box mod of your e-cigarette.
2. Screw the head base from the glass tank, while the mouthpiece points to
the ground.
3. Remove the old atomizer head and insert a new one. Please first drip a few
drops of e-liquid directly into the wick of the coil to make it fully saturated
before first use.
4. Connect all parts again and make sure that
no e-liquid can leak.
5. Screw the clearomizer back to the battery /
box mod.
Please also note the operating instructions on page 42.
44