Mercura GYROLED M80 Mode D'emploi page 8

05/09/2019
WIRING AND FLASH PATTERN SELECTION
13 Flash patterns are integrated in the M80 GYROLED®. The operating mode setting must only be chosen
when the M80 GYROLED® is on and using a mobile magnet (not supplied). The operation consists in
moving the magnet in front a position located between the reference index and the fixing hole on its right.
14. R65 Rotating
15. R65 Double Flashing
16. Triple Flashing
17. Simple Flashing
18. ½ Rotating
19. ½ Double Flashing
20. ½ Triple Flashing
Do not stare directly at the GYROLED
Siège social/Head-quarters : Zone d'Activités « Les Gailletrous » - rue Louis Pasteur- 41260 LA CHAUSSEE SAINT VICTOR – FRANCE -
GT-0692-FEUX Ind B
GYROLED® M80 FIXATION ISO OU HAMPE
ISO OR POLE MOUNTING M80 GYROLED®
AVAILABLE FLASH PATTERNS
Tel : 00 33 (0) 2 54 57 52 52 – Fax 00 33 (0) 2 54 56 80 00
SAS au capital de 102. 400 € - APE (NAF) 2790 Z – SIRET 310 999 891 00040
I. MOBILE MAGNET (NOT SUPPLIED)
J. M80 GYROLED®
K. REFERENCE INDEX
L. FIXING HOLE
M. N°2 POWER SUPPLY WIRE
N. GYROLED® SWITCH (NOT SUPPLIED)
O. PROTECTION FUSE* (NOT SUPPLIED)
P. N°1 GROUND WIRE
*NOT SUPPLY (MERCURA REFERENCE 30736-00). NOTA:
THIS FUNCTION CAN BE ENSURE BY THE MEAN OF A
COMMON MAGNET.
21. ½ Single Flashing
22. ICAO Flashing
23. ICAO Rotating
24. ½ ICAO Flashing
25. ½ ICAO Rotating
26. N°1 Led and n°8 Led 1Hz / 50% Flashing
during operation, so as to avoid eye damage.
®
Page 8
30629-01