Publicité
Les langues disponibles
Les langues disponibles
8670838
OPERATION
IMPORTANT! Before starting the tool, mark the first chain link to be
sharpened with chalk or a visible felt marker. Use it as a starting point
reference as you cycle through all teeth in one direction.
1. Turn the bolt (#29) to adjust the chain stop (#28). Set the chain stop against
the tooth to be sharpened.
2. Switch the tool on. Plunge the grinding wheel carefully onto the tooth.
Adjust pressure as necessary.
NOTICE! Avoid putting excessive pressure as you plunge as this may cause
the teeth to collide and damage the chain.
10
12V Bar Mount Chainsaw Sharpener
For technical questions call 1-800-665-8685
V4.0
Fig. 5
Fig. 6
Publicité
