Greenlee Quick Draw Manuel D'utilisation page 8

Setup and Operation (cont'd)
• Inspect tool for wear or damage. Replace any
worn, damaged, or missing components with
Greenlee replacement parts. A damaged or
improperly assembled tool can break and strike
nearby personnel with sufficient force to cause
severe injury or death.
• Inspect the punch, die, and drawstud for wear or
damage. Replace any worn or damaged items
with Greenlee replacement parts. Replace any
punches that have dull cutting surfaces.
Electric shock hazard:
This tool is not insulated. When
using this unit on or near energized
electrical lines, use proper personal
protective equipment.
Failure to observe this warning
could result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris or hydraulic oil.
Pinch points:
Keep hands away from the tool
head when punching.
Failure to observe these warnings
could result in severe injury or death.
Do not secure this tool in a vise. This tool is
designed for hand-held operation.
Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
Greenlee Tools, Inc.
Quick Draw Hydraulic Knockout Drivers
®
8
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070