AUTO-HAK R07 Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
Cat. no. R07
Class: A50-X
Designed for:
Manufacturer: FIAT
Model: PUNTO
Type: 3/5 door (176)
produced since 09.1993 till 08.1999
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 0969
This towing hitch is designed according to rules of safety traffic regulations. The
towing hitch is a safety component and can be install only by qualified personnel.
Any alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer mass and max. vertical
cup mass are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK Sp.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel./fax (059) 8-414-414; 8-414-413
e-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 6,65 kN
maximum trailer weight: 1300 kg
maximum vertical cup load: 50 kg
Foreword
Max vehicle weight [kg]
9,81
X =
1000
Max vehicle weight [kg]
D [kN]