AUTO-HAK C48A Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
Cat. no. C48A
Class: A50-X
Designed for:
Manufacturer: FORD
Model: FOCUS II
Type: 4 doors (Mk2)
produced since 05.2005 till 02.2011
Approval number according to Directive 94/20/EC: e20*94/20*0005*00
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x Max vehicle weight [kg]
Max trailer weight [kg] + Max vehicle weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 8,5 kN
maximum trailer weight: 1500 kg
maximum vertical cup load: 75 kg
Foreword
9,81
= D [kN]
X
1000