SEVERIN Hygenius glass Li25 SC 7141 Mode D'emploi page 26

a
FTer cleaning winDows
5 After cleaning windows
WARNING!
Keep the housing of the window cleaner away from water. There is a risk of electric shock!
CAUTION!
Remove and clean the microfibre pad immediately after use, then dry. Otherwise mould
and bacteria may form, resulting in a decreased cleaning efficiency of the microfibre pad.
CAUTION!
The spray bottle and the dirty water tank must also be emptied immediately after use.
Otherwise there is a risk of water contamination or accidental water leaks during storage.
1. Turn spray nozzle to STOP position.
2. Remove microfibre pad from the spray bottle, clean and dry (24 hours at room temperature).
CAUTION!
Do not wash the microfibre pad with sensitive fabrics. The hook and loop fastener may
cause damage.
NOTE:
The microfibre pad can be washed in the washing machine at 30 °C.
3. Empty spray bottle.
4. Hold window cleaner upright and press the unlatching buttons on both sides with one hand. Carefully
remove the dirty water tank in downward direction.
5. Empty dirty water tank above a drain and rinse with tap water if necessary.
6. Remove the squeegee lip and clean.
7. Unscrew, clean and dry cleaning head.
CAUTION!
None of the components of the window cleaner are dishwasher-safe.
8. Allow all previously cleaned components to dry (at least 24 hours at room temperature).
9. Attach the cleaning head, the squeegee lip and the dirty water tank to window cleaner again.
10. Attach the microfibre pad to the spray bottle again.
11. Store window cleaner, spray bottle and USB cable in a dry, cool place and out of the reach of children.
For additional tips on cleaning, see also > illustrated Quick Start Guide.
26