Connections - Alpine KCE-300BT Mode D'emploi

Connections

• Connect a Bluetooth compatible unit and an iPod
Bluetooth compatible
Unit (Sold separately)
1
iPod (Sold separately)
1 To iPod Direct connector
2 10Pin DIN Cable (Included)
3 FULL SPEED
TM Connection Cable (KCE-422i)
(Depending on the connected unit, this cable
may be supplied or sold separately.)
4 Microphone (Included)
5 Audio Interrupt Out lead (Pink/Black)
6 Audio Interrupt In lead (Pink/Black)
All manuals and user guides at all-guides.com
2
3
®
to the Bluetooth Box
4
5
(If the Bluetooth Box is
7
connected, you cannot use a
device connected to the INT
lead (voice interruption, etc.))
8
9
7 ACC (Ignition) lead (Red)
To the ACC Power lead.
8 Battery lead (Yellow)
Connect this lead to a terminal that constantly
provides power (to the positive (+) post of the
battery).
9 Ground lead (Black)
Connect to a metal part of chassics body with
screw.
6
11
-EN