Publicité
ONCE POLE SECTIONS ARE ASSEMBLED - THEY CANNOT BE TAKEN APART !
2.
Align poles using alignment marks. First, assemble top (2)
and middle (3) poles together by bouncing them on a scrap
piece of wood on the ground as shown in FIG A. until the top
pole (2) moves to the 2 1/2 inch (6,4 cm) mark you previously
made on the middle pole (3). THEN add bottom pole (4) and
assemble in the same way, until the middle pole moves to the
2 1/2 inch (6,4 cm) mark you previously made on the top of the
bottom pole (4).
CAUTION!
WHEN PROPERLY
ASSEMBLED, THE POLES
SHOULD HAVE A 2-1/2"
(6,4 CM) OVERLAP.
FIG A.
scrap wood
(Not Supplied)
IMPORTANT!
middle pole
IDENTIFICATION
STICKER
middle pole
9
2 1/2"
(6,4 CM)
IDENTIFICATION
STICKER
2 1/2"
(6,4 CM)
TOP
2
alignment mark
MIDDLE
3
alignment mark
BOTTOM
4
Publicité
