NESTLE Pulsar H Mode D'emploi page 11

Installing the appliance horizontally on a stable surface using tripod threaded connec-
tion on a tripod at the desired height.
Switch 1 ON/OFF: Powers the laser up or down.
Power indicator: When the light is on, the instrument is on.
The unit starts automatically after the end of the self-leveling with the rotation.
If the unit is outside of the self-leveling range, the rotation stops and laser starts
flashing. The laser must be realigned.
Automatic Tilt off
By pressing the button 2 is the automatic tilt-off activated. In shock or change in posi-
tion the rotation stops, the laser flashes and automatically levels itself not a new.
Working with the laser receiver
In the case of PULSAR H a laser receiver is included.
4
1 2
|
Gottlieb NESTLE GmbH Freudenstädter Str. 37-43
OPERATION
5
3
|
72280 Dornstetten
1 ON/OFFSwitch
2 Sound button
3 Sensitivity button
4 Display
5 Receiver field
An arrow in the display shows the di-
rection where to move the receiver.
Prerequisite: The laser beam must strike
the receiver field.
| |
Tel. 07443 / 9637-0 Email: info@g-nestle.de
|
www.g-nestle.de