____________________________________________________________________________________
1. Safety notes
Read these instructions carefully before assembling. The assembly and commissioning of the entire
unit may only be carried out by an authorised specialist. Before starting work, familiarise yourself with
all parts and their operation. In order to prevent accidents and damage to people and property, please
follow these safety instructions closely
The assembly location must be frost-proof and easily accessible.
The erection site/area must meet the regional and local fire safety requirements.
1.1. Regulations / Directives
Observe the applicable accident prevention regulations, environmental legislation and statutory rules for
the assembly, installation and operation. Furthermore, follow the relevant DIN, EN, DVGW, VDI and
VDE (incl. lightning protection) directives and all of the current national standards, laws and directives
which apply.
1.2. Before commissioning
Check the product for completeness. Immediately make a note of transport damage and other grounds
for complaint and before assembly, inform our office!
In the case of non-compliance, claims cannot be made for damages or malfunctions that have arisen
under the warranty that is provided.
2. Description of the Victaulic
Victaulic connection technology has been a well known system for a long time. Up until now, it has
mainly been used in plant engineering. It is characterised by its quick and easy assembly.
After assembly, the Victaulic coupling catches the
beading found inside the pipe. The pressure-
reacting C-shaped seal fits the standard roll or
mill-grooved pipe. All of the supplied couplings
contain a seal which is approved for hot water
systems (up to 110 °C). Always read the
assembly instructions before assembling the
Victaulic couplings and accessories.
The installation manual is available from Victaulic,
or online at www.victaulic.com.
___________________________________________________________________________________
GDD GmbH Kulmbach
Seite 12 von 28
FD 9105