23 02 07R / 10.06.2019
Packing list:
1 3-conductor cable set
1 5-conductor cable set
1 Socket 7-pin
1 Socket retaining plate
1.
Disconnect the earth lead from the battery
2.
Remove covers inside boot located near standing lights.
3.
In order to connect electric bunch to connection socket drill two 6mm diameter holes in proper places at the back
wall of vehicle. Expand existing holes to 20mm diameter. Secure the hole with anticorrosion agent.Fix the provided
cable terminal in the drilled hole
Connect the cable set in the following way:
4.
a)
Bring the 3/5 wire end of the wiring set with a sleeve terminal through the bushing (made at item 3) from
the boot space outwards and further on, through the hole on the socket clamp.
b)
Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c)
Disassemble the socket and connect cables according to the following assignment:
Picture1
Function:
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
5.
There are plug connections in both tail lights. Disassemble them:
a)
Connect connection bunch joint with black/green, grey/red and brown leads to right tail lights, and
connect original vehicle plug to this connection,
b)
Connect connection bunch joint grey/white, grey, grey/black, black/red, black/white to left tail lights,
and connect original vehicle plug to this connection,
Electrical Set for Trailer Connection
7-pin
Mercedes Benz W201 manufactured from 12.82 -
Part no.:
1 Relay with C2 output
1 Mounting plate for relays
1 Control light frame with a lamp 3 Screws M5X35
1 Relay socket with conductors
Installation instruction
Contact description:
1
(L)
2
(54-G)
3
(31)
4
(R)
5
(58-R)
6
(54)
7
(58-L)
8
(58-b)
230207R
WYR
2 Rubber grommet
1 Screws M5X10
4 Nuts M5
Cable colour:
black/white
grey
brown
black/green
grey/red
black/red
grey/black
grey/white
4 Spring washer
6 Cable ties
1 Sheet-metal screw
1 Mounting plate for relays
1
2
6
7
3
5
4
8
Contact description in
7-pin socket