AUTO-HAK P27A Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
P27A
Cat. no.
Class: A50-X
Designed for:
Manufacturer: CITROEN
Model: C5 I
Type: 5 doors
produced since 10.2004 till 2008
Approval number acc. to regulations EKG/ONZ 55.01:
Torque settings for nuts and bolts (8,8):
M6 - 11 Nm
M12 - 87 Nm
This towing hitch is designed according to rules of safety traffic regulations. The
towing hitch is a safety component and can be install only by qualified personnel.
Any alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the areas of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup mass are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK Sp.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 9,17 kN
maximum trailer weight: 1600 kg
maximum vertical cup load: 75 kg
E20 55R-01 1608
M8 - 25 Nm M10 - 50 Nm
M14 - 138 Nm M16 - 210 Nm
Foreword
Max vehicle weight [kg]
9,81
=
X
1000
Max vehicle weight [kg]
D [kN]