Publicité
Les langues disponibles
Les langues disponibles
FITTING INSTRUCTION
4
6
7
13
16
13
10
17
19
Rys. 1
2
This towbar is designed to assembly in following car:
CITROEN C5 I 5 doors, produced since 10.2004 till 2008, catalogue no.
P27A and is prepared to tow trailers max total weight 1600 kg and max
vertical load 75 kg.
From manufacturer
Thank you for buying our product. Their reliability has been confirmed in
many tests. Reliability of towbar depends also on correct assembly and right
operation. For this reasons we kindly ask to read carefully this instruction and
apply to hints.
The towbar should be install in points described by a car producer.
Fitting instructions
1. Disassemble the bumper and plastic cover plate.
2. In factory prepared places fix side brackets (pos. 3 and 4) using bolts
M10x35mm pos. 7 (loosely).
Clamp mark
in acc. with
Cables joining
ISO
PN
1
L
Left directional lights
2
+
Rear fog lights
3
31
Ground
4
R
Right directional lights
8
5
58R
Right side parking lights
6
54
Stoplights
7
58L
Left side parking lights
18
3
5
6
1
7
3. Assemble cover plate, before install cut out his fragments according to
figure 2.
4. Put main bar of the towbar pos. 1 between fixed side brackets and twist
on bolts M12x35mm (pos. 6).
5. Tighten all bolts according to the torque shown in the table.
6. Assemble the bumper, before assemble cut out his fragments according
to figure 3.
7. Fix the socket plate (pos. 18) as shown on the drawing.
8. Fix body of the automat (pos. 19) using bolts M12x25mm (pos. 5) from
accessories. Place tow-ball (pos. 2) according to supplied instruction.
9. Connect electric wires of 7-poles socket according to the instruction of
the car. (Recommend to make at authorized service station)
10. Complete paint layer damaged during installation.
7
195
255
Fig. 3 Bumper cut.
cover plate
Fig. 2 Cover plate cut
80
Publicité
