battery has been fully charged, the LED indicator lights orange.
4. The LED indicator will light 4-5 seconds later after the adapter has been
connected to the tablet and the wall outlet.
Step 2
Turning On the Tablet
Note: This Nextbook device has been equipped with Windows 8.1 system at the factory,
so user need not perform Windows setup again before using for the first time.
1. Press and hold the Power button for 2 seconds to turn on your tablet. The lock screen
appears.
2. Swipe-up your finger from the bottom of the display to switch to the login screen, and
then enter password to log in to Windows.
Now the tablet is ready for use when the Windows Start screen is displayed.
Note: If the login screen is not enabled in Windows 8.1, you will be taken directly from the
lock screen to the Start screen.
Step 3
Turning Off the Tablet
You can turn off the tablet in two ways:
Using the Power button:
1.
Press and hold the Power button for at least 4 seconds.
2.
Swipe-down the shutdown confirmation screen to the bottom edge of the display to
turn off the tablet.
Using Charms:
1.
Swipe-in from the right edge of the display to access Charms.
2.
Touch Settings
Step 4
Inserting a microSD Card
1. Pick up a microSD card.
2. Align the microSD card so that the pins are pointed toward the card slot.
3. Push the microSD card into the card slot.
Shut down to turn off the tablet.
Power
3