Risco VUpoint RVCM52W Guide D'installation page 15

8. Click Add; the following message is displayed.
If the "Connect to WiFi" message is displayed, go straight to step 8.
9. Select one of the following options:
Connect to Wi-Fi – to establish a wireless network connection (go to step 9 to
connect the IP camera to the wireless network).
Not Now – to maintain IP Camera connection using a LAN network
connection (skip the wireless network connection steps 10, 11 and 12 and
connect the IP camera to the LAN network).
10. If you selected the "Connect to Wi-Fi" option, a list of available wireless
networks is displayed.
NOTE: The MAC address is case sensitive and should be entered
exactly as it is shown on the box or on the back cover of the IP camera,
e.g. AA:BB:CC:DD:EE:FF
Figure 10 Waiting for camera to connect message
Figure 11 Connect to WiFi message
Figure 12 List of available wireless networks
13