Publicité
Les langues disponibles
Les langues disponibles
4. Click the Network Cameras link in the left-hand column; the IP Camera List
page is displayed.
5. Click Add Camera; the Add Camera dialog box is displayed.
6. Select the RISCO P2P Camera type.
7. Define the following fields in the Add Camera dialog box.
Field
Label
Partitions
Type
MAC Address
Figure 7 Control Panel Update Page
Figure 8 IP Cameras List
Figure 9 Add Camera
Description
Enter a name for the camera
Select the partition(s) from the list of defined partitions
Choose the RISCO P2P Camera type (for ONVIF or Generic camera
type settings, refer to the RISCO Cloud Installer Application Manual)
Enter the MAC address into this field. The MAC address (media access
control address) is the unique identifier assigned to the IP camera for
communications on the physical network.
12
Publicité
