PNI HUNTING 2C Manuel Utilisateur page 4

BASIC OPERATIONS
1. Open the cover on the back of the camera and insert the micro SD card and the batteries
Power on the camera
2. Press and hold Power/Navigation button
working mode after indicator flashes 5 times
3. Press once the Menu/OK button
Manual Photographing/ Video Recording
Test Mode main Interface - press again Power/Navigation button
4.
videos, or photo+video based on camera settings; stop video recording by pressing again
Power/Navigation button
Enter Menu for setup functions
5. Test Mode main Interface - press the Menu/OK button
now the button
made
6. Press and hold the button
Mode (Camera Modes Menu) after you have made all the settings
7. Test Mode main Interface - Press and hold the button
PIR mode; (the led indicator will blink 3 times, the screen will fe off)
Power off the camera
8. Press and hold the button for 5 seconds
CAMERA OPERATION
Camera ON/OFF
(PIR Auto, Test, OFF)
User manual
to wake up camera LCD screen to enter Test Mode
it is for navigation only; the button
for 3 seconds, to return to the main interface of the Test
PIR Auto Mode
Test Mode
Power off
for 3 seconds; camera will enter PIR Auto
to enter the settings menu;
it is just to confirm the settings
for 3 seconds, to enter Auto
to turn off the camera.
Hold pressed Power button
for 3 seconds; the camera
will enter PIR Auto mode after
the led indicator blinks 5 times
PIR Auto mode, press once
the button Menu/OK
wake up the camera's screen
and enter Test mode
Hold pressed Power button
for 3 seconds in order to
turn off the camera
to shoot photos,
to
4