Zeiss Power Supply 12V 100W Mode D'emploi page 7

Power Supply 12V 100W
7 TECHNICAL DATA
Dimensions (width x depth x height)
Power Supply 12V 100W. ............................................................. approx. 220 mm x 250 mm x 105 mm
Weight
Power Supply 12V 100W. ................................................................................................. approx. 3.5 kg
Ambient Conditions
Transportation (in packaging):
Admissible ambient temperature .................................................................................... -40 to +70 °C
Storage:
Admissible ambient temperature ..................................................................................... +5 to +40 °C
Admissible air humidity (no condensation) ............................................................. max. 75 % at 35 °C
Operation:
Admissible ambient temperature ..................................................................................... +5 to +40 °C
Admissible relative humidity (no condensation) ...................................................... max. 75 % at 35 °C
Operation altitude .......................................................................................................... max. 2000 m
Atmospheric pressure ......................................................................................... 800 hPa to 1060 hPa
Pollution degree ............................................................................................................................... 2
Operating Data
Environment for use ............................................................................................................ closed rooms
Protection class ...................................................................................................................................... I
Protection type ................................................................................................................................ IP 20
Electrical safety ........................................................... in compliance with DIN EN 61010-1 (IEC 61010-1)
..............................................................................................................
Overvoltage category ............................................................................................................................ II
Radio interference suppression ......................................................... in compliance with EN 55011 class B
Noise immunity .................................................................................... in compliance with DIN EN 61326
Line voltage .................................................................................... 100 to 127, 200 to 240 V AC ±10 %
.........................................................................................
Line frequency .......................................................................................................................... 50/60 Hz
Power consumption ............................................................................................................ max. 280 VA
Fuses in accordance with IEC 127
Power Supply 12V 100W. ................................................................................................. T 5 A/H, 250 V
8 INSTALLATION CONDITIONS
The installation conditions of the microscope used are valid. Otherwise the ambient conditions from the
chapter TECHNICAL DATA must be observed.
09/2017
TECHNICAL DATA
432610-6044-008
including CSA and UL directives
No change of line voltage setting required!
ZEISS
5