VSG 000 Serie Instructions D'installation page 22

16. Hose Covers and Anchoring
Position hose covers as necessary per control
cabinet location. Use provided anchors to fasten all
hose covers securely, Fig. 11.
Position hose covers directly under each platform
to 1/2" (18mm) clearance, Fig. 11a.
NOTE: IF THE PLATFORMS ARE SPACED FURTHER
THAN 23-5/8" (600mm) DURING INSTALLATION, SHIFT
THE HOSE COVERS UNDER PLATFORMS AND MIDDLE
HOSE COVERS AS NEEDED TO AVOID GAPS.
NYLON
ANCHORS
1/2" (13mm) CLEARANCE
BETWEEN THE EDGE OF
THE HOSE COVER AND
FRAME.
22
Fig. 11
Fig. 11a