Bravetti Professional K4321B Mode D'emploi page 5

OPERATING INSTRUCTIONS
The following cooking times reflect only the approximate time needed to fry one
basket 1/2 full. The exact time may be different depending on actual quantity,
personal cooking preferences, size and thickness of pieces, etc...
Temperature Settings
In general, use lower settings for delicate foods (vegetables, fish) and higher settings
for frozen foods, french fries and chicken.
Food Cooking Time
French Fries 6-9 minutes
Fish Fillets 3-5 minutes
Chicken Fingers 6-8 minutes
Chicken Pieces 13-20 minutes
Fried Zucchini 3 minutes
Fried Mushrooms 3 minutes
Onion Rings 3 minutes
Donuts 3-5 minutes
Apple Beignets 4 minutes
Shrimp 4-6 minutes
Filtering & Changing the Oil
• Make sure the deep fryer is unplugged
and the oil has cooled before cleaning
or storing the deep fryer.
• The oil does not need to be changed
after each use. In general, the oil will
be tainted rather quickly when frying
food containing a lot of protein (such
as poultry, meat or fish). When oil is
mainly used to fry potatoes and is
filtered after each use, it can be used 8
to 10 times. However, do not use the
same oil for longer than 6 months.
• To filter the oil, first make sure the oil
has cooled and then empty the oil from
the oil container into another container
or bottle. (Fig. 6)
• Wash and dry the oil container and
basket. Refill the oil container with the
oil, pouring the oil through a wire
strainer or paper filter. (Fig. 7)
All manuals and user guides at all-guides.com
Temperature
190° C (375°F)
160° C (320°F)
175° C (350°F)
175° C (350°F)
160° C (320°F)
160° C (320°F)
160° C (320°F)
175° C (350°F)
175° C (350°F)
160° C (320°F)
Fig. 6
Fig. 7
7
OPERATING INSTRUCTIONS
Connecting the Detachable
Power Supply Cord
Your deep fryer has been specifically
designed with your safety in mind. This
unit has a unique detachable power supply
cord. This power supply cord is designed
to "Break Away" from the fryer body in the
event that the supply cord is inadvertently
pulled. This is intended to prevent the
tipping of the appliance and hazardous
spillage of hot oil.
The female receptacle portion of the power
supply cord is permanently attached to the
rear of the the control panel. To connect
the male power cord plug to the female
receptacle on the appliance, orient the
male plug so that it mates with the female
receptacle. The male plug can only be
inserted one way. If the male plug will not
go into the receptacle on the appliance,
rotate the male plug 180° and insert again.
IMPORTANT:
Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
Cleaning Instructions
WARNING:
Always remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
• Follow the cleaning instructions on
page 3. (Using for the First Time)
• Never immerse the control panel,
cord or plug in water or any other
liquid.
• Do not place the control panel, cord
or plug in the dishwasher.
• Clean the control panel only with a
damp cloth.
• The oil container, frying basket, lid
cover and filter can be washed in the
dishwasher.
• The body of the deep fryer can be
washed in warm soapy water. Do
not put the body of the deep fryer in
the dishwasher.
How To Reset the Deep Fryer
If for some reason the deep fryer stops
heating, the reason might be that the
safety re-set switch has tripped. To
reset the the deep fryer, follow the
instructions listed below:
• Push the thermostat reset button
located on the back of the control
panel. (Fig. 8) The unit will beep to
indicate that it has re-set.
Thermostat
Reset
RESET
Fig. 8
8