Publicité
NOTA IMPORTANTE: To keep the battery in good conditions, we
recommend you to charge when the battery has completely run out. At the
same time, do not interrupt the charging process until the battery is full.
BLUETOOTH
®
≥
Having your Energy Wireless BT7 turned off, press the PARING button (1)
10 seconds, until the LED (1) start flashing in two colors (red/blue) at that
time your Energy Wireless BT7 is waiting for the paring with your other
Bluetooth
device; at the same time in your Bluetooth
®
laptop, etc. start the scan and the sync devices. Once you found your
Energy Wireless BT7 in your device you only have to select and pair.
NFC PARING*
≥
At present there are some smartphones with NFC (Near Field
Communication) technology, letting you pair devices just having contact
between them.
The Energy Wireless BT7 has this NFC function so you can sync your
smartphone just with one touch.
To sync your smartphone and thel Energy Wireless BT7 you
have to follow:
1.
Turn on the NFC and Bluetooth
2.
Touch with your smartphone the right ear cap of the Energy Wireless BT7
(NFC pinting place) and hold it for three seconds.
3.
Confirm the paring in your smartphone.
The Energy Wireless BT7 has to be activaed all the time.
PARING
®
in your smartphone.
21
, mobile, tablet,
®
Publicité
