Publicité
Setting the clock
When the oven is first connected, or after a power failure, '0.00' will flash on the display.
To set the clock, push the middle set button and the (+) or (–) buttons immediately to the
desired time. The time of day will be saved after 10 seconds.
Using the timer
The timer can be set for a maximum period of 99 minutes and a minimum of 10 seconds.
To set the timer just push the (+) or (-) button until you have set the required time in
minutes and seconds.
When the timer is operating the timer on indicator will be lit.
Once the pre-set time has elapsed, the timer will beep Push the SET
button to switch off.
The (–) button can also be used to change the volume of the beep.
Using the electronic timer (EN)
Cod. 013M72
Publicité
